Clarkson Mark I/II/III Tool and Cutter Grinder - Videos
BOTTOM
HOME
VIDEO LINKS
Here are links to videos featuring the Clarkson Tool and Cutter Grinder, and associated tooling and equipment:
Video - A G Engineering - part 1 - tooth rest bracket for general work
Video - A G Engineering - part 2 - spiral tooth rest bracket
Video - A G Engineering - part 1 - centre brackets
Video - A G Engineering - part 2 - centre brackets
Video - Andrew Mawson - showing the ABFGA attachment running on air
Video - dynoguy - part 1 - restoration - serial no 2021
Video - dynoguy - part 2 - restoration - serial no 2021
Video - George Heg - DPTLGA
Video - George Heg - DPTLGA - 4 facet drill bit grinding
Video - Jet Jokey - Smart and Brown Mark 2 - showing the machine
Video - lookcreations - sharpening insert cutters
Video - lookcreations - making centre brackets
Video - Paul Hopewell - part 1 - universal head
Video - Paul Hopewell - part 2 - universal head
Video - Paul Hopewell - part 3 - universal head
Video - Paul Hopewell - part 4 - universal head
Video - TanTanCnc - flute grinding with a Weldon 200 sharpening device
Video - JBFromOZ - serial number 6466 - the machine has a new home
Video - Robonthemoor - mill and drill flute sharpening tool
Video - Robonthemoor - making T-Nuts for the Clarkson
Video - Go Create Hobby Machine Shop -Part 1- regrinding Mark1 slide surface - using a surface grinder
Video - Go Create Hobby Machine Shop - Part 2 - regrinding Mark1 slide dovetail - using a shaper
TOP
HOME