Clarkson Mark 2 Tool and Cutter Grinder - Mark 2 Page 2 |
This is a later March Engineering version of the machine.
It was described as:-
It was described as:-" Clarkson MK11 cutter grinding machine. Single phase electric from a 13amp socket. This machine is in very good condition and has a roller table fitted which makes delicate grinding easier than the old friction slide that is normally fitted. It is supplied with universal tool holder, pair of centres, wheel dressing bracket and diamond fitted. A large quantity of extras is also included with the machine most of which are coated in protective material to prevent rusting. A good selection of various grinding wheels is included and a good selection of steel wheel washers. There are a set of brand new head bearings and an unused drive belt is also included. Spindle speeds are 4000 and 6000 RPM. The drive motor is 3/4 HP which is standard for this machine. There are a good selection of indexing rings to grind 2, 3, 4, 5, 6 flutes etc. the machine can be seen running before collection.
This is a later March Engineering version of the machine.
It was described as:-