HISTORY






BOTTOM  HOME


The newest additions and changes to this website are at the top of the list.

Any html code changes are noted at the bottom of this page.




August 13th 2016 - Added a some more Clarkson user pictures. Motor Mounting Brackets in the Unknown User section


August 13th 2016 - Clarkson pictures. Added pictures to Gallery 9 (April onwards).


August 13th 2016 - Added a new Perfecto Owners page. Perfecto owners page


August 13th 2016 - Added some Perfecto pictures. Perfecto motorised shaper (Hemel Hempstead)


August 13th 2016 - Added some Perfecto Lathe pictures. Perfecto Lathe - Bury St Edmunds


May 27th 2016 - Added links to YouTube videos. Clarksons on You Tube


May 15th 2016 - Software. Dividing Head Calculator.


May 14th 2016 - Clarkson pictures. Added pictures to Galleries 7,8, and 9 (2014-2016).


May 9th 2016 - Updated the serial numbers in the Excel Workbook. amended 'clarkson-serial-numbers.xls'


May 9th 2016 - Added a new Nameplate, Dates, Serial Numbers page. Nameplates, Dates, Serial Numbers


May 9th 2016 - Added a new Clarkson Spare Parts page. Clarkson Spare Parts


May 9th 2016 - Added some more Tooling pictures. Centres, Accessories, Stand


May 9th 2016 - Added a drawing. Swivel Table rough sketch and dimensions


May 8th 2016 - Added some Mark 2 pictures. Mark 2 pictures


May 8th 2016 - Added some Perfecto Lathe pictures. Other Perfecto equipment (not shaper)


May 8th 2016 - Added lots of Perfecto pictures (at the bottom of the page). Perfecto Hand Shaper pictures


May 8th 2016 - Added some more pictures to the Clarkson Attachments page. Drill Point and Tap Lead Grinding Attachment


May 8th 2016 - Added some more pictures to the Clarkson Attachments page. Controlled Spiral Grinding Attachment


May 8th 2016 - Added some more pictures to the Clarkson Attachments page. Dust Extraction Units


May 8th 2016 - Added a new Refurbishment page. Refurbishment contents


May 8th 2016 - Clarkson pictures. Reordered the entries on the Gallery pages. Gallery 2 is 2009, Gallery 3 is 2010 Gallery 4 is 2011 and so on.


May 8th 2016 - Clarkson pictures. Added a new Gallery page 9.


May 8th 2016 - Clarkson pictures. Added pictures to Gallery 8.


January 7th 2016 - Fein Depth Stop Tool. Tools - home made Depth Stop Tool for the Fein MultiMaster multitool.


December 5th 2015 - Numatic NVD750 dust extractor mods. Reorganised the page and added some NVD mods and usage.


September 15th 2015 - Workshop Trolley. Ikea Raskog Trolley


September 6th 2015 - Removing Wheel Security Bolts. Security Bolt 5406.02 - lost socket


May 4th 2015 - Added a new Refurbishment page. Refurbishment log by Arnold Bryan


May 3rd 2015 - Updated the serial numbers in the Excel Workbook. amended 'clarkson-serial-numbers.xls'


May 3rd 2015 - Added some Perfecto pictures (at the bottom of the page). Nuneaton Hand Shaper


May 3rd 2015 - Added some Perfecto literature. Perfecto leaflets in [8] References


May 3rd 2015 - Added some Perfecto Lathe and Leaflet pictures. Lathe literature and Solihull pictures


May 3rd 2015 - Uploaded a new Mark 2 page. Mark 2 - page 2


May 3rd 2015 - Uploaded a new Clarkson 8 gallery of photos. More Clarkson photos - Gallery 8


May 3rd 2015 - Added some Mark 2 pictures. Mark 2 pictures


May 3rd 2015 - Added some more pictures to the Clarkson Attachments page. RGA, Vice


May 3rd 2015 - Added some more Tooling pictures. Spindle Housing, in the Miscellanous section


May 3rd 2015 - Added some more Tooling pictures. Bushes, Motor


January 24th 2015 - Clarkson pictures. More Clarksons Photos - Gallery 7


January 18th 2015 - Clarkson Machine Tools Nameplate. Added a picture of a Clarkson Machine Tools Nameplate


January 18th 2015 - Updated the serial numbers in the Excel Workbook. amended 'clarkson-serial-numbers.xls'


January 17th 2015 - Added a Clarkson Manual. Mark 1 and 2 Operators Handbook - front cover only


January 17th 2015 - Added a Contents section. Reorganised the page and added a Contents section to the Clarkson Literature page


January 17th 2015 - Added some Mark 2 pictures and added a Contents section. Mark 2 pictures and added a Contents section


January 17th 2015 - Added pictures of two Perfecto leaflets. Shaper and Cutter Grinder leaflets in 8.References for the Perfecto Shaper ..


January 17th 2015 - Added some Perfecto pictures (at the bottom of the page). Chesterfield Hand Shaper


January 17th 2015 - Added some Perfecto Lathe pictures. Other Perfecto equipment (not shaper)


December 28th 2014 - Added some more pictures to the Clarkson Attachments page. RGA


December 28th 2014 - Added some more Tooling pictures. Centre Brackets, Spindle Extension, Universal Head


December 28th 2014 - Added an Attachments Brochure. Attachments Brochure - front cover picture only


December 28th 2014 - Added a few more Clarkson Mark 2 pictures. Newest pictures at bottom of the page


December 28th 2014 - Added some Perfecto information. Added company information to the History section


December 28th 2014 - Added some Perfecto pictures (at the bottom of the page). Stockport Hand Shaper


December 28th 2014 - Clarkson pictures. More Clarksons Photos - Gallery 7


November 16th 2014 - I am in the middle of relocating the workshop, so not much done this year :(


November 16th 2014 - Added a few more Clarkson Mark 2 pictures. Newest pictures at bottom of the page


November 16th 2014 - Added some more pictures to the Clarkson Attachments page. DPTLGA, Vice, RGA, Dust Extraction Unit with Grit Blast Cabinet


November 16th 2014 - Added some Perfecto Lathe pictures and redid the Contents section. Other Perfecto equipment (not shaper)


November 16th 2014 - Added some more Tooling pictures. Universal Head and Centres


November 16th 2014 - Added some more Tooling pictures. Table End Cover, in the Miscellanous section


November 16th 2014 - Uploaded a new Clarkson 7 gallery of photos. More Clarkson photos - Gallery 7


September 7th 2014 - Started to add a Contents section to each of the pages.


September 6th 2014 - Added a few more Clarkson Mark 2 pictures. Newest pictures at bottom of the page


September 6th 2014 - Amended the Mark 2 Serial Number information. Mark 2 Serial Number information


September 6th 2014 - Uploaded a new Clarkson 6 gallery of photos. More Clarkson photos - Gallery 6


September 6th 2014 - Resized some pictures in Gallery 5. Gallery 5


September 6th 2014 - Added a Perfecto shaper advert. Perfecto Caldwells Industries advert 1970


September 6th 2014 - Added some more Tooling pictures. Centres and Brackets


September 5th 2014 - Added a Perfecto vice picture. Machine vice


August 24th 2014 - Added some Perfecto pictures. Perfecto lathe (not shaper)


July 13th 2014 - Added some Perfecto pictures (at the bottom of the page). A hand operated shaper


July 13th 2014 - Added some Perfecto pictures and reorganised the page. Other Perfecto equipment (not shaper)


July 13th 2014 - Added a few more Clarkson Mark 2 pictures. Newest pictures at bottom of the page


July 13th 2014 - Clarkson pictures. More Clarksons Gallery 5


July 13th 2014 - Added some more Tooling pictures. Universal Head and Centre Brackets


July13th 2014 - Added some more pictures to the Clarkson Attachments page. An RGA


June 18th 2014 - Added some Perfecto pictures (at the bottom of the page). A hand operated shaper


June 18th 2014 - Added another picture of a Dust Extraction Unit. Some good detail pictures of the Dust Extraction Unit


June 15th 2014 - A brass dipstick Tools - sectioned brass dipstick for Real Ale casks


June 15th 2014 - Added some more Tooling pictures. Mark 2 spindle, Mark 2 elevating nut, table, tooling collection, in the MISC section


June 15th 2014 - Added some more Tooling pictures. Centre brackets


June 15th 2014 - Added a some more Clarkson user pictures. Workholder and indexer in the Unknown User section


June 15th 2014 - Added some more pictures to the Clarkson Attachments page. Base for the 3-Way Vice and some RGAs


June 15th 2014 - Clarkson pictures. More Clarksons Gallery 5


June 15th 2014 - Clarkson pictures. More Clarksons Gallery 4


June 15th 2014 - Added a few more Clarkson Mark 2 pictures. Newest pictures at bottom of the page


June 8th 2014 - Added some Perfecto pictures in the Caldwell Industries section. Pages 22 and 23 of the Caldwell Industries 1974 Craftmanship Catalog


June 6th 2014 - Added some information about flat belts. Flat belts on crowned wheels


May 18th 2014 - Added a Contents list to the Perfecto Literature page. New contents list, and reorganised the page just a little


May 18th 2014 - Added a new Perfecto page. Other Perfecto equipment (not shaper)


May 18th 2014 - Clarkson pictures. Added some Clarkson pictures going back to January 2014


May 18th 2014 - Added some Perfecto pictures (at the bottom of the page). A rusty one and one with replacement parts


March 7th 24th 2014 - Added a some Perfecto information. I think I have made some sense of the Machine Serial Numbers.


March 7th 24th 2014 - Added a some Perfecto information. I got hold of a copy of the Caldwell 1974 catalog, which has Perfecto information.


February 24th 2014 - Clarkson pictures. Added a picture of the Devlieg nameplate


February 24th 2014 - Added a few more Clarkson photos. An American Clarkson/Devlieg


February 24th 2014 - Added a some Perfecto information. Pictures of the Caldwell 1974 catalog (American) with references to the Perfecto.


February 24th 2014 - Added a some Perfecto information. Picture of an invoice for some Perfect lathe bearings.


February 18th 2014 - Added some more pictures to the Clarkson Attachments page. DPTLGA


February 16th 2014 - Added some more Tooling pictures. Leadscrew Nut in the misc section, Centre Brackets


February 16th 2014 - Added some more pictures to the Clarkson Attachments page. 3-Way Vice, DPTLGA, RGA


February 16th 2014 - Added another picture of a Dust Extraction Unit. Dust Extraction Unit


February 16th 2014 - Added quite a few more Clarkson Mark 2 pictures. Newest pictures at bottom of the page


February 16th 2014 - Added a few more Clarkson photos. I will annotate the pictures when I get time.


February 16th 2014 - Added a few more Perfecto pictures (at the bottom of the page). Perfecto shapers for sale


February 16th 2014 - Added a some more Clarkson user pictures. Centre Brackets in the Unknown User section


February 15th 2014 - Had to do another 306 wheelbearing. Updated the 'procedure' section in wheelbearing notes.


February 15th 2014 - I have not updated the website in a long time as I was out of action for quite a few months last year and got behind with everything.


July 16th 2013 - Added a some Perfecto information. A Perfecto leaflet and a Graces Guide advert.


July 7th 2013 - Added a quite a lot of Perfecto pictures (at the bottom of the page). Perfecto shapers for sale


July 7th 2013 - Added a some Perfecto information. I noticed that some machine badges do not carry the Perfecto Machine Number (see top of page after the vice)


July 7th 2013 - Added a few more Clarkson photos. More Clarkson photos


July 7th 2013 - Added some more pictures to the Clarkson Attachments page. 3 way vice base and an RGA from Wickford


July 7th 2013 - Added information to the Clarkson information page. Just a photo of a milling cutter catalogue, at the bottom of the page


June 16th 2013 - Added some more pictures to the Clarkson Attachments page. RGA s/n r513


June 16th 2013 - Added quite a few more Clarkson Mark 2 pictures. Newest pictures at bottom of the page


June 16th 2013 - Added a few more Clarkson photos. More Clarkson photos


June 11th 2013 - Uploaded a new Clarkson 5 gallery of photos. More Clarkson photos - Gallery 5


June 11th 2013 - Added another picture of a Dust Extraction Unit. Dust Extraction Unit


May 28th 2013 - Added a new Dust Extraction Unit section to the Clarkson Attachments page. Dust Extraction Units


May 28th 2013 - Added a few more Clarkson photos. More Clarkson photos


April 21st 2013 - Added some more Tooling pictures. Mark 2 table - in the Miscellaneous section


April 21st 2013 - Added a few more Clarkson photos. More Clarkson photos


April 21st 2013 - Added a couple of serial numbers to the Workbook. amended clarkson-serial-numbers.xls


April 10th 2013 - Added some more pictures to the Clarkson Attachments page. 3-Way Vice, DPTLGA, RGA


April 10th 2013 - Added some more Tooling pictures. Green Centre Brackets


April 10th 2013 - Added some more Tooling pictures. Electrical items in the new Electrical section


April 10th 2013 - Added a few more Clarkson photos. More Clarkson photos


April 10th 2013 - Added some Clarkson Mark 2 pictures. One from NorthAllerton and one costing 3300 pounds


February 19th 2013 - Added some more pictures to the Clarkson Attachments page. Clarkson Attachments - Controlled Spiral Grinding Attachment


February 19th 2013 - Added a few more Clarkson photos. More Clarkson photos


February 19th 2013 - Added some more Tooling pictures. Blue Centre Brackets


February 19th 2013 - Added a few more Perfecto pictures (at the bottom of the page). Shaper - Perfecto information and literature


February 19th 2013 - Added some Clarkson Mark 2 pictures. One from Newcastle and one repainted


January 12th 2013 - Added a Perfecto picture (at the bottom of the page). Shaper - Perfecto information and literature


January 12th 2013 - Added a few more Clarkson photos. More Clarkson photos


January 11th 2013 - Reorganised the Links page. Links


December 28th 2012 - Cheap Chinese Bench Drill modifications. Bench Drill Mods


December 27th 2012 - Had a look at the Clarkson Spindle Bearings. Clarkson Spindle Bearings


December 25th 2012 - Installed a small 3 Phase motor. Motor Installation


December 20th 2012 - Added a few more Clarkson photos. More Clarkson photos


December 2nd 2012 - Added some more Tooling pictures. Raising Blocks for Centre Brackets


November 30th 2012 - Added a few more Clarkson photos. More Clarkson photos


November 18th 2012 - Added a few more Clarkson photos. More Clarkson photos


November 17th 2012 - Added some more Tooling pictures. Swivel table (in Misc), Centre Bracket


November 15th 2012 - Added a picture of the Clarkson Mark 2 height scale. Clarkson Mark 2 height scale


November 15th 2012 - Added a few more Clarkson photos. More Clarkson photos


October 28th 2012 - Added a few more Clarkson photos. More Clarkson photos


October 16th 2012 - Uploaded a new Clarkson 4 gallery of photos. More Clarkson photos - Gallery 4


October 16th 2012 - Added a few more Clarkson photos. More Clarkson photos


October 16th 2012 - Added some more pictures to the Clarkson Attachments page. Clarkson Attachments - Radius Grinding Attachment, Air Bearing Flute Grinding Attachment


October 16th 2012 - Added some more Tooling pictures. Universal Head, Holders etc


August 14th 2012 - 'McGard Wheel Lock - Bolt Style' tool. Removing 'McGard Wheel Lock - Bolt Style' wheel bolts.


August 6th 2012 - Added a some more Clarkson user pictures. Universal Vice by Matthew Tinker


August 4th 2012 - Added some more Tooling pictures, and reorganised the tooling into groups. Clarkson Mark 1 and Mark 2 Tooling


August 4th 2012 - Added more Clarkson Mark 2 pictures. Clarkson Mark 2 at the bottom of the page


July 27th 2012 - Added a few more Clarkson photos. More Clarkson photos


July 16th 2012 - Added a Peugeot 306 tool. Tool to hold the Camshaft Sprocket stationary during removal/assembly (on the 306 Tools page)


July 15th 2012 - Added a Peugeot 306 tool. Valve Spring Compressor (on the 306 Tools page)


July 8th 2012 - Added more Clarkson Mark 2 pictures. Clarkson Mark 2 at the bottom of the page


July 8th 2012 - Added a few more Clarkson photos. More Clarkson photos


July 7th 2012 - Added some more pictures to the Clarkson Attachments page. Clarkson Attachments - Controlled Spiral Grinding Attachment


July 5th 2012 - Added some new Perfecto pictures (at the bottom of the page). Shaper - Perfecto information and literature


June 27th 2012 - Lathe drive repair. Temporary repair to the drive dog clutch.


June 26th 2012 - Awesome Clarkson Videos. Clarkson Videos (thanks to Matthew Tinker for pointing these out).


June 23rd 2012 - Uploaded the DPTLGA manual in PDF format. Drill Point and Tap Lead Grinding Operators Handbook


June 23rd 2012 - Added some more pictures to the Clarkson Attachments page. Clarkson Attachments - Radius Grinding Attachment


June 23rd 2012 - Added a few more Clarkson photos. More Clarkson photos


June 23rd 2012 - Added more Clarkson Mark 2 pictures. Clarkson Mark 2 at the bottom of the page


June 21st 2012 - Added a Peugeot 306 tool. Peugeot 306 cylinder head lever


June 21st 2012 - Added a few more Clarkson photos. More Clarkson photos


June 21st 2012 - Added a picture of some Clarkson Handbooks. Clarkson Handbooks


June 8th 2012 - Added some Peugeot 306 tools, misc, and a timing belt job. Peugeot 306 menu


June 4th 2012 - Experimental spanner holder.An MDF spanner holder


May 20th 2012 - Added a few more Clarkson photos. More Clarkson photos


May 20th 2012 - Added some more Tooling pictures, at the bottom of the page. Clarkson Mark 1 and Mark 2 Tooling


May 20th 2012 - A sad but true Staple Wizard repair job.Stapler quick repair


April 25th 2012 - Added a few more Clarkson photos. More Clarkson photos


April 25th 2012 - Added a some more Clarkson user pictures. Work Holder - see Unknown Users at the bottom of the page


April 25th 2012 - Added history and other information snippets throughout the Perfecto page. Shaper - Perfecto information and literature


April 22nd 2012 - Added some new Perfecto pictures (at the bottom of the page). Shaper - Perfecto information and literature


April 15th 2012 - Added a few more Clarkson photos. More Clarkson photos


April 14th 2012 - Added some information about 'Paint' for the Clarkson Mark 1. Plans, drawings, dimensions, and colours


April 14th 2012 - Added some more pictures to the Clarkson Attachments page. Clarkson Attachments - Drill Point and Tap Lead Grinding Attachment


April 13th 2012 - Added some more Tooling pictures. Clarkson Mark 1 and Mark 2 Tooling - unmachined castings for centre brackets


April 6th 2012 - Fitting a new motor mounting plate. Clarkson Motor Mounting


March 30th 2012 - Uploaded a Clarkson Mark 1 brochure in PDF format. Clarkson Operators Manual 1968, 4th Edition


March 30th 2012 - Added cover pictures of some Operators Handbooks. Clarkson Operators Handbook


March 30th 2012 - Added some more pictures to the Clarkson Attachments page. Clarkson Attachments


March 30th 2012 - Added some more Tooling pictures. Clarkson Mark 1 and Mark 2 Tooling


March 30th 2012 - Uploaded quite a few new Perfecto pictures (at the bottom of the page). Shaper - Perfecto information and literature


March 30th 2012 - Added some more information regarding the Barry Jordan model. Barry Jordan Mark 1 model information


March 30th 2012 - Uploaded a new Clarkson 3 gallery of photos. More Clarkson photos


March 29th 2012 - Added some Peugeot 306 pictures and information. Peugeot 306 menu


Sorry to say I have not updated this site in over a year. I have had other things to do and just have not had the time to attend to the site. I have been collecting Clarkson pictures, and will post these when I get time.


February 25th 2011 - Added a few more Clarkson photos. More Clarkson photos


February 25th 2011 - Added information to the Clarkson information page. Photo of the demolished Clarkson site


February 20th 2011 - Added some more Tooling pictures. Clarkson Mark 1 and Mark 2 Tooling


February 20th 2011 - Revised the plans, drawings and dimensions page. Plans, drawings, and dimensions


February 20th 2011 - Added a new Clarkson Attachments page. Clarkson Attachments


February 20th 2011 - Added a few more Clarkson photos. Update .. an Australian machine sold on ebay has found a new owner (serial number 7898).


February 20th 2011 - Added more Clarkson Mark 2 pictures. Clarkson Mark 2 pulley spindle pictures and dimensions supplied by Patrick Carlier


February 20th 2011 - Added more Clarkson Mark 2 pictures. Clarkson Mark 1 and Mark 2 spindle pictures and dimensions supplied by Ken Widdall.


February 20th 2011 - Added more Clarkson Mark 2 pictures. Clarkson Mark 2 photos of the recent example on ebay


February 20th 2011 - Added a some more Clarkson user pictures. Indexing Unit for milling cutters by Ken Widdall


February 20th 2011 - Added a few more Clarkson photos. More Clarkson photos


February 20th 2011 - Added a router table page. Router table currently under construction


February 13th 2011 - Added some tool pictures. Tools - Short vice handle for the Soba precision vice


January 19th 2011 - Added a new 'Clarkson Drawings' page. Plan and drawings for the Clarkson equipment and accessories


January 15th 2011 - Finally got some replacement screws for the Clarkson. Socket set screws for gib


January 14th 2011 - Added a few more Clarkson photos. More Clarkson photos


January 12th 2011 - Added some tool pictures. Tools - Lathe Spindle Hand Crank


January 8th 2011 - Added a Clarkson Mark 3 page. Clarkson Mark 3 photos and information


January 6th 2011 - Added some more Clarkson photos. More Clarkson photos


January 1st 2011 - Added a Clarkson Mark 2 page. Clarkson Mark 2 photos and information


January 1st 2011 - Uploaded a new Perfecto picture (at the bottom of the page). Shaper - Perfecto information and literature


December 28th 2010 - Added a some more Clarkson user pictures. Clarkson mods/parts by Patrick Carlier


December 28th 2010 - Added a some more Clarkson user pictures. Clarkson mods/parts by Bernard Wright


December 14th 2010 - Added some more Clarkson photos. More Clarkson photos


December 14th 2010 - Added some cover pictures of some Operators Handbooks. Clarkson Operators Handbook


December 14th 2010 - Added some price info from Machine Spares. For Sale by Machine Spares (at the bottom)


December 14th 2010 - Uploaded some Perfecto pictures and info. Shaper - Perfecto information and literature


December 5th 2010 - Added a new page to show homemade parts and mods by various Clarkson owners. Clarkson mods/parts by Patrick Carlier


December 1st 2010 - Added some more Clarkson photos. More Clarkson photos


November 27th 2010 - Finished the wood turning job I started in September. Some MDF circles.


November 17th 2010 - Added some more Clarkson photos. More Clarkson photos


November 13th 2010 - Added some information to the Clarkson information page. Clarkson information


November 13th 2010 - Uploaded a Clarkson Mark 1 brochure in PDF format. Clarkson Brochure


November 13th 2010 - Uploaded a Clarkson Mark 1 manual in PDF format. Clarkson Operators Handbook


November 6th 2010 - Added some more Clarkson photos. More Clarkson photos


October 2nd 2010 - Added a Links page. Some Links


October 2nd 2010 - Added some more Clarkson photos. More Clarkson photos


September 22nd 2010 - I did some wood turning. Some MDF circles.


September 22nd 2010 - I got a Numatic NVD750 dust extractor. Numatic Dust Extractor


September 11th 2010 - Added some more Clarkson tooling. Some Spindle Extension photos and dimensions


September 9th 2010 - Added some more Clarkson photos. More Clarkson photos


September 4th 2010 - Added a Clarkson information page. Clarkson information


September 4th 2010 - Split the Clarkson pictures into 2 galleries. Clarkson Mark1 - Gallery 1


August 28th 2010 - Added some more Clarkson pictures and a short serial number list. A gallery of Clarkson Mark1 pictures


August 22nd 2010 - Added some more Clarkson pictures. A gallery of Clarkson Mark1 pictures


August 22nd 2010 - Uploaded a Perfecto picture Shaper - Perfecto information and literature


August 13th 2010 - Clarkson pictures. A gallery of Clarkson Mark1 pictures


July 30th 2010 - Shower pump motor repair. New brushes


May 27th 2010 - 3D drawings of the Universal Head and Bracket. Universal Head dimensions


May 12th 2010 - Testing out an idea Misc - Facing a big tube


May 12th 2010 - Some homemade boring bars Tools - boring bars


May 12th 2010 - Homemade tailstock die holder Tools - tailstock die holder


May 12th 2010 - A homemade internal keyway cutter Tools - internal keyway cutter


May 12th 2010 - Some simple 306 tools Tools - 306 tools


May 9th 2010 - A Glanze boring bar holder Tools - boring bar holder


May 3rd 2010 - Clarkson Swivel Mount Grinder - tidied up the Swivel Mount base, and added some degree dials (pictures at the bottom)


March 9th 2010 - Uploaded a few more Perfecto pictures Shaper - Perfecto information and literature


February 26th 2010 - Mill Quill Depth Stop - added the depth stop locking collar assembly Mill - Quill depth stop


February 26th 2010 - Mill Quill Dti- added a test indicator mounting Mill - Dti mount


February 26th 2010 - Simple Oscillating Steam Engine Simple Oscillating Steam Engine


February 24th 2010 - Uploaded a few files and pictures that are Perfecto related Shaper - Perfecto information and literature


October 2009 - Started the website



WEB PAGE CODING CHANGES

These web pages are automatically created with the aid of a 'html webpage writer' program, personally written in Visual Basic VB.Net (Visual Studio 8).
Each webpage is generated via a text file. The text files contain 'pseudo' html code. The 'html webpage writer' program interprets the 'pseudo' html code in each of the text files, and then generates the proper html coded text files that make up the webpages for this website.

May 8th 2016 - Inserted a code block to automatically generate the Serial Numbers table by reading a CSV file version of the Workbook.
January 17th 2015 - Modified the code that automatically generates the 'Contents Tables' when parsing text in the webpage Source text files.
September 7th 2014 - Made a few alterations to the 'html webpage writer' code, and recompiled the executable.
September 7th 2014 - A Contents Table (to link to Anchors) can be generated for every webpage.
May 18th 2014 - Made a few minor alterations to the 'html webpage writer' code, and recompiled the executable.
May 18th 2014 - Added a 'Bottom-Home' hyperlink to all webpages.
May 18th 2014 - The W3 validator hyperlink is now automatically inserted by the 'html webpage writer' program.
May 18th 2014 - Uploaded and overwrote all html pages on the server.

 





Valid HTML 4.01 Transitional

TOP  HOME